Extension Tube

  • 5'6" long of 3" square 3/16 steel. Weighs 40 lbs.
  • Tool working lengths are 9 1/2' at shortest pin setting to 13 1/2' fully extended.
  • Total working weight of tool main frame, with slide in butt plate is 110 lbs. Weight with 4 paddles (approximately 2 lbs. each) is 118 lbs.
  • With one extension tube*, working length is 18 1/2' (most culverts are 35' total length) and total tool weight is 158 lbs.

*Most culverts and bridges are plugged within the first 6-8 feet of the opening and do not require the tool extension.




Paddles & Scoops

  • T-paddles are in 9", 12" and 16" lengths of 3/8" A36 steel, weighing approximately 2 lbs. each.
  • Scoop paddles are 3", 5" and 9" of 3/8" A36 steel and allow the tool to be configured to clean culverts as small as 15" round, to 15"x25" oval culverts, to larger than 25" round culverts.

Tool Main Frame

  • 8'6" long of 3" square 3/16 steel. Weighs 70 lbs.
  • Tool slide-in butt plate is 10" x 10" 3/8 steel plate, with 5' long shaft of 2 1/2" 3/16 steel. Weighs 40 lbs.

Back To Top