Introducing The Bad Boy Culvert Cleaner

Clean culverts quickly and easily with the NEW Culvert Cleaner by Bad Boy, Inc.

Clean culverts quickly and easily with the NEW Culvert Cleaner by Bad Boy, Inc. Clean culverts quickly and easily with the NEW Culvert Cleaner by Bad Boy, Inc.

Attaches Easily To Your Track-Hoe Or Back-Hoe Bucket

The Bad Boy Culvert Cleaner’s unique sweeping T-paddles expand open when pulling debris and rocks from culverts as small as 15” in diameter and up to 25” in diameter. Rocks and debris larger than 2’ diameter and over 150 lbs. are no match for the Culvert Cleaner.

Specifically designed to tackle the most difficult clogs under bridges, low water bridges, square culverts, concrete or steel culverts, beaver dams and irrigation culverts. Lifting force can even be used to straighten and repair damaged steel culverts.

Attaches Quickly, Works Fast

Attach the Culvert Cleaner into the bucket with a chain for easy installation and simply push into clogged culvert to remove debris. It’s that easy - and quick!

Watch the Bad Boy Culvert Cleaner in action as it unclogs and straightens a steel culvert.

Extension Tube

  • 5'6" long of 3" square 3/16 steel. Weighs 40 lbs.
  • Tool working lengths are 9 1/2' at shortest pin setting to 13 1/2' fully extended.
  • Total working weight of tool main frame, with slide in butt plate is 110 lbs. Weight with 4 paddles (approximately 2 lbs. each) is 118 lbs.
  • With one extension tube*, working length is 18 1/2' (most culverts are 35' total length) and total tool weight is 158 lbs.

*Most culverts and bridges are plugged within the first 6-8 feet of the opening and do not require the tool extension.




Paddles & Scoops

  • T-paddles are in 9", 12" and 16" lengths of 3/8" A36 steel, weighing approximately 2 lbs. each.
  • Scoop paddles are 3", 5" and 9" of 3/8" A36 steel and allow the tool to be configured to clean culverts as small as 15" round, to 15"x25" oval culverts, to larger than 25" round culverts.

Tool Main Frame

  • 8'6" long of 3" square 3/16 steel. Weighs 70 lbs.
  • Tool slide-in butt plate is 10" x 10" 3/8 steel plate, with 5' long shaft of 2 1/2" 3/16 steel. Weighs 40 lbs.

Back To Top